Select an equipment type below to view the available inventory

(1) NEW 275 Ton Sutherland Presses Double Point Gap Frame Press (M#9582)

MODEL: Mark 2-275-1
Capacity: 275 US Tons
Stroke: 6.69”
Speed: 25 - 45 SPM Variable
Rating Point (above bottom dead center): 0.14”
Die Height to top of Bolster: (SDAU): 23.82”
Die Height Adjustment: 4.72” motorized with digital readout
Slide Area: 82.68” lr x 27.56” fb (JIC T-slots on 6” centers)
Bolster Area: 106.30” lr x 35.43” fb (JIC T-slots on 6” centers)
Bolster Thickness: 6.69”
Floor to Bolster (not including isolation mounts): 35.43”
Floor Space Required: 118.11” x 100.20” approx
Overall Height: 169.45” approx (not including isolation mounts)
Weight: 93,333# approx
Main Motor: 40 HP, 480 volt, variable speed
Slide Adjustment motorized: 0.5 HP
Air Pressure Required: 72 psi
Air Counter Balance Capacity: 5,556# (adjustable @ aircenter / twin ACB)

Optional Pneumatic Die Cushions
Capacity: (two cushions are standard): 15 US Tons
Stroke Length: 3.94”
Cushion Area: 25.20” x 18.50 (LR x FB x 2 Pin Pads)

Warranty; 3-2-1 Year
Accuracy: (report in each press manual) CNS 1st & JIS 1st
Documentation: ISO 9000-01-02