Select an equipment type below to view the available inventory

(1) NEW 176 Ton Sutherland Presses Double Point Gap Frame Press (M#9571)

MODEL: Mark 2-176-1
Capacity: 176 US Tons
Stroke: 5.12”
Speed: 40 - 85 SPM Variable
Rating Point (above bottom dead center): 0.12”
Die Height to top of Bolster: (SDAU): 19.09”
Die Height Adjustment: 3.94” motorized with digital readout
Slide Area: 62.99” lr x 21.65” fb (JIC T-slots on 6” centers)
Bolster Area: 78.74” lr x 29.92” fb (JIC T-slots on 6” centers)
Bolster Thickness: 5.91”
Floor to Bolster (not including isolation mounts): 35.43”
Floor Space Required: 86.61” x 76.38” approx
Overall Height: 146.02” approximate (not including isolation mounts)
Approximate Weight: 47,778 Lbs
Main Motor: 20 HP, 480 volt, variable speed
Slide Adjustment motorized: 0.5 HP
Air Pressure Required: 72 psi
Air Counter Balance Capacity: 3,556# (adjustable @ aircenter / twin ACB)
I-PRESS Omron Control

Optional Pneumatic Die Cushions
Capacity: (two cushions are standard): 7 US Tons
Stroke Length: 2.76”
Cushion Area: 16.14” x 10.24 (LR x FB x 2 Pin Pads

Warranty; 3-2-1 Year
Accuracy: (report in each press manual) CNS 1st & JIS 1st
Documentation: ISO 9000-01-02