Select an equipment type below to view the available inventory



(1) Used 800 Ton Blow Straight Side Double Crank Press (M#10357)


MODEL: SC2-800-144-54
YEAR: 1997
SPECIFICATIONS:
Serial Number: SDG-800-422-97
Capacity: 800 Tons
Stroke: 16”
Slide Adjustment: 10”
Shut Height: 36” Over Rolling Bolster
Bed & Slide Area: 144” L-R x 54” F-B
Speeds: 15 - 30 SPM
Windows: 42”
Rolling Bolster
Operator Control Station
HMS #500 Transfer System - 2 Axis / 15 Station / 18” Maximum Pitch

Approximate Overall Dimensions: 233” L-R x 142” F-B
Approximate Height Above Floor: 212”
Approximate Overall Height: 283”
Approximate Weight: 250,000#

This press is currently disassembled and offered completely reconditioned !!!!!

Reconditioning Scope of Work to be done:
1) BASE
(a) Cleaned, degreased, primed and painted (This process has been completed)
2) CROWN
(a) Clean and remove all lubrication lines
(b) Set up in weld shop
(c) Set up on mill validate bore alignment
(d) Install all NEW lines
(e) Furnish and install all NEW main bearings
(f) Fit crankshaft to bearings
(g) Prep for assembly and Paint
3) CRANKSHAFT
(a) Set up on lathe and oil polish as required and check TIR
4) BACHSHAFT
Set up on lathe and polish as required
5) (2) CONNECTIONS
(a) Provide material, manufacture and install
(b) NEW upper bushing bushings
(c) Hone as required
(d) Paint
6) MAIN GEARS
(a) Inspect for cracks and weld/repair if required
(b) Set up on VTL and indicate teeth and check for warpage
(c) Grind and paint
7) PINIONS
(a) Debur/Polish and prep for assembly
8) CLUTCH, BRAKE, COUNTERBALANCES and MOTORS
(a) Inspect and repair where necessary

Note: This quotation includes controls that are currently on press. Updated or new
controls as selected by customer will be quoted as additional expense.

We would also sell press “AS-IS” for reduced price !!!