Select an equipment type below to view the available inventory

(1) NEW 220 Ton Sutherland Presses Double Point Gap Frame Press (M#9580)

MODEL: Mark 2-220-1
Capacity: 220 US Tons
Stroke: 5.91”
Speed: 35 - 70 SPM Variable
Rating Point (above bottom dead center): 0.12”
Die Height to top of Bolster: (SDAU): 19.69”
Die Height Adjustment: 4.72” motorized with digital readout
Slide Area: 72.83” lr x 25.59” fb (JIC T-slots on 6” centers)
Bolster Area: 94.49” lr x 33.07” fb (JIC T-slots on 6” centers)
Bolster Thickness: 7.28”
Floor to Bolster (not including isolation mounts): 35.43”
Floor Space Required: 103.15” x 87.99” approx
Overall Height: 151.54” approx (not including isolation mounts)
Approximate Weight: 60,000 Lbs
Main Motor: 25 HP, 480 volt, variable speed
Slide Adjustment motorized: 0.5 HP
Air Pressure Required: 72 psi
Air Counter Balance Capacity: 4,444# (adjustable @ aircenter / twin ACB)

Optional Pneumatic Die Cushions
Capacity: (two cushions are standard): 11 US Tons
Stroke Length: 3.15”
Cushion Area: 21.26” x 13.78 (LR x FB x 2 Pin Pads)

Warranty; 3-2-1 Year
Accuracy: (report in each press manual) CNS 1st & JIS 1st
Documentation: ISO 9000-01-02